01 / WHY THIS DOOR
Safety planning meets a refined, open look.
The door leaf, frame, fire-rated glazing, seals and compatible hardware should be specified as a complete assembly. Our team can discuss layouts and finishes around your architectural opening and project requirements.
Visibility
Glazed panels support sightlines between spaces.
|
Layouts
Single, double and combined designs for project review.
|
Coordination
Door, glass, frame and hardware specified together.
|
02 / MATERIAL OPTIONS
Steel and stainless steel directions.
 Steel glazed fire doors
Painted steel frames for offices, commercial spaces and public buildings.
|
 Stainless steel glazed fire doors
Metallic finishes for hospitality and premium architectural interiors.
|
Product images illustrate possible designs. Final construction and rating require project-specific confirmation.
03 / DESIGN DETAILS
Choose the configuration and finish.
|
Dark steel finish
|
 Metallic stainless finish
|
Finish palette: Black · White · Cream · Grey · Black titanium · Gold titanium · Rose gold · Natural stainless steel. Confirm colour, sheen and material with physical samples before production.
04 / APPLICATION SETTINGS
Start with the building, then specify the door.
Each setting has different circulation, access, appearance and fire-safety needs. The examples below show the kinds of spaces where a properly specified glazed fire door assembly may be considered.
Venue images are illustrative concepts, not completed Shenghao installations or evidence of a fire rating. Review each opening with the project designer and local code.
05 / DOOR LAYOUT CATALOGUE
Choose a layout from the original drawings.
These line drawings preserve the arrangement and numbering from our Chinese detail page: a standard double door, Options 1–14, and Options 15/16. They show leaves, sidelights and transoms for discussion.
Please quote the option number, overall opening width × height, clear passage width and fixed-panel dimensions. Mullion placement, glazing area and hardware must be checked against the approved fire-tested assembly.
06 / SPECIFICATION GUIDE
Define the assembly before ordering.
|
Frame material
|
Steel or stainless steel; section and construction by the approved assembly.
|
|
Configuration
|
Single or double leaf, unequal pair, sidelight, transom or combined arrangement, subject to review.
|
|
Fire-rated glass
|
Type, thickness and classification to match the specific test evidence and project brief.
|
|
Finish
|
Painted steel or natural and decorative stainless steel finishes; approve a physical sample.
|
|
Hardware
|
Compatible hinges, lock, closer, coordinator and pulls as required by the approved assembly.
|
|
Custom scope
|
Opening size, glass layout, handing, colour and hardware.
|
|
Fire performance
|
Confirm the selected door assembly against its valid report, certificate and applicable local code.
|
The source Chinese detail page references GB 12955—2024 and project requirements. International projects must confirm their local standard and acceptance criteria. No fixed fire rating is promised for every configuration.
07 / MEASUREMENT GUIDE
Measure the finished opening in millimetres.
|
Width
|
Measure between side reveals at top, middle and bottom. Report all three readings.
|
|
Height
|
Measure from finished floor to the underside of the opening at left, centre and right.
|
|
Wall depth
|
Record wall thickness and tell us if finishes, cladding or an existing frame are present.
|
|
Site photos
|
Send photos from both sides plus floor and head details. Note irregular walls and thresholds.
|
Send the raw measurements. The frame size and installation allowance should be confirmed on the shop drawing; do not deduct a guessed clearance.
08 / OPENING DIRECTION
Confirm the swing with a plan sketch.
Label the corridor and room sides. Show the hinge side, handle side, the direction in which each leaf swings, and the active leaf for a double door. Photograph both sides of the opening. Handing terms differ by market, so a sketch with swing arrows is the clearest instruction.
Example order note: “Standing on the corridor side, the active leaf is on the right and swings toward the corridor.” Confirm this against a drawing before manufacture.
09 / ORDER CHECKLIST
What to send for an accurate quote.
Opening schedule
Quantity, widths, heights and wall depths.
|
Layout and handing
Option number, swing sketch, active leaf and photos.
|
Finish and glass
Material, colour, glass brief and reference images.
|
Performance documents
Required fire classification, local standard and project drawings.
|
Delivery and installation
Destination country, project timeline and installation responsibilities.
|
